Robustel R2110e
eSIM Router
Industrial Dual-SIM 4G/LTE Router with 1x eSIM/eUICC, 1x 2FF SIM 4 x Gigabit LAN Ports
The Robustel R2110e is an LTE Cat-4 industrial router built for deployments where managing SIM logistics across geographies, carriers, or long device lifecycles creates operational friction. It shares the same proven hardware platform as the R2110, with one deliberate change: the second physical SIM slot is replaced by an embedded MFF2 eSIM compliant with GSMA SGP.22, producing a hybrid 1รMini SIM (2FF) + 1รeSIM architecture that supports remote profile download, activation, switching, and removal โ without physical access to the device.
The practical implication is a different operational model. Where the R2110 suits stable deployments with locally-sourced SIM requirements, the R2110e is the right choice when connectivity management needs to live in software: because devices are geographically dispersed across carrier boundaries, because the device lifecycle will outlast the current carrier agreement, or because deployment scale makes per-device SIM handling impractical.
All core R2110 capabilities are carried over: WWAN/WAN/WLAN link redundancy with ICMP detection, cold and warm backup with load balancing, IPsec/OpenVPN/GRE/WireGuard VPN, four gigabit Ethernet ports (configurable as 1รWAN + 3รLAN), RS-232/RS-485 serial, isolated DI/DO, dual-band 802.11ac Wi-Fi, optional GNSS, and the full RobustOS platform with C/C++ SDK and App Centre.
eSIM/eUICC Support
Remotely provision and deploy up to 6 eSIM/eUICC Profiles
Wi-Fi
Dual-band 802.11ac Wi-Fi 5 on 2.4GHz and 5GHz ISM Bands
INTERFACES
1x WAN, 3x LAN or 4x LAN,
1x RS-232, 1x RS-485, 1x DI/DO
OPERATING SYSTEM
RobustOS – Lightweight Linux kernel with full SDK
RCMS ON-BOARD
RCMS Cloud device management enabled
R2110 Product Video
Example R2110 Use Cases
In-Vehicle Connectivity Hub
Provides secure LTE backhaul and onboard Wi-Fi for fleet operations. The hybrid SIM + eSIM architecture means carrier profiles can be switched remotely as vehicles cross regional boundaries or when contract terms change โ without retrieving the device or touching the SIM tray. Optional GNSS supports location reporting; RCMS centralises firmware updates, configuration, and eSIM profile management across the entire fleet from a single platform.
Intelligent Traffic Systems
Backhauls controller and signage data to your platform via encrypted tunnels; dual-link failover across WWAN and WAN maintains reachability. For multi-authority or cross-border deployments where infrastructure is managed under different carrier agreements, eSIM profile switching allows connectivity to be reassigned remotely as operational boundaries or contracts change โ without dispatching technicians to roadside cabinets.
Digital Signage & Screens
Delivers reliable LTE backhaul from media players to your CMS, keeping content updates and monitoring data flowing. For large screen networks spanning multiple cities or regions, the R2110e’s remote eSIM provisioning removes the need to pre-configure SIMs per location or send field teams to swap carriers when a site moves to a different network contract. Centralised management via RCMS covers configuration, firmware, and connectivity from a single console.
Looking for more use cases?
With millions of Robustel devices deployed across more than 100 countries, itโs impossible to capture every use case above. Explore the links below to discover some of the exciting and innovative ways our technology is making an impact worldwide.
This Device is RCMS Ready
RCMS is a cloud-based IoT device management platform that gives you real-time visibility across your entire Robustel fleet. So you can troubleshoot, update, and optimize performance from anywhere at anytime, without sending engineers to site.
Product Mounting Options
Desktop Mount
DIN Rail Mount
Wall Mount
System Architecture
|
Operating System |
RobustOS |
|
CPU |
Dual-core MIPS, 880 MHz |
|
RAM |
512MB |
|
Flash |
32MB |
Cellular
|
Supported Technologies |
4G/LTE, 3G, 2G |
|
Antennas |
2 (MAIN + DIV) |
|
Connector |
SMA-K |
|
SIM |
1x eSIM/eUICC (MFF2) and 1 x Mini SIM (2FF) |
Ethernet
|
Ethernet Ports |
4 x 10/100/1000 Mbps, 4 x LAN by default, can be configured as 1 x WAN + 3 x LAN |
|
Magnet Isolation Protection |
1 KV |
PoE In (Optional)
|
PoE Ports |
WAN1 |
|
PoE Standards |
802.3at PD |
Serial Port
|
Serial Ports |
1 x RS-232 + 1 x RS-485 |
|
Connector |
2 x 3-pin on 2 x 5-pin 3.5 mm female socket |
|
Baud Rate |
300 bps – 115200 bps |
|
Signal Definition |
RS-232: TXD, RXD, GND |
Digital Input/Output
|
DI/DO Ports |
1 x DI + 1 x DO (wet contact) |
|
Connector |
2 x 2-pin on 2 x 5-pin 3.5 mm female socket |
|
Isolation |
3.75 K VDC |
|
Absolute Maximum VDC |
+30 VDC (DI), +30 VDC (DO) |
|
Absolute Maximum ADC |
100 mA (DO) |
|
Signal Definition |
DI+, DI-, DO+, DO- |
Wi-Fi
|
Wi-Fi Antennas |
2 (Wi-Fi 1 + Wi-Fi 2) |
|
Connector |
RP-SMA-K |
|
Standards |
802.11 a/b/g/n/ac, 2 x 2 MIMO, supporting AP and Client modes |
|
Frequency Bands |
2.412 โ 2.472 GHz (2.4 GHz ISM band) |
|
Security |
WEP, WPA, WPA2, WPA3 |
|
Encryption |
AES, TKIP, WEP64 |
GNSS/GPS (Optional)
|
GNSS Antennas |
1 |
|
Connector |
SMA-K with 50 ohms impedance |
|
GNSS Technology |
GPS/QZSS/GLONASS/Galileo/BeiDou |
|
Tracking sensitivity |
GNSS: greater than -148 dBm |
|
Horizontal position accuracy |
GNSS: 2.5 m |
Other Interfaces
|
Reset Button |
1 x RST |
|
LED Indicators |
1 x RUN, 1 x MODEM, 1 x NET, 1 x USR, 1 x RSSI, 1 x Wi-Fi |
|
Watchdog |
Built-in |
|
SD Card |
1 x Micro SD |
|
USB |
1 x USB 2.0 (host), 5 V, 500 mA |
Power Supply & Consumption
|
PSU Connector |
3-pin 3.5 mm female socket with lock |
|
Input Voltage |
12/24 V DC, 9 ~ 36 V DC |
|
Power Consumption |
Idle: 6 W@12 V |
|
Recommended Power Supply |
12 V DC/1.5 A power adapter |
Physical Characteristics
|
Ingress Protection |
IP30 |
|
Housing & Weight |
Metal, 500g |
|
Dimensions |
48 x 100 x 125 mm |
|
Installation Options |
Desktop, Wall Mount and 35mm DIN Rail |
|
Operating Temperature |
-20 – +55 ยฐC (normal operation) |
|
Storage Temperature |
-40 – +85 ยฐC |
|
Relative Humidity |
5 – 95% RH (non-condensing) |
Software Features
|
Network Protocols |
PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, NTP, SMTP, Telnet, ARP, VLAN, SSH2, DDNS, etc. |
|
VPN Tunnels |
IPsec, OpenVPN, GRE, WireGuard |
|
Firewalls |
DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
|
Remote Management |
RCMS, Web, CLI, SMS |
|
Serial Port Protocols |
Transparent, TCP Client/Server, UDP, Modbus RTU to TCP |
|
SIM Management |
Smart Roaming V3 |
|
Optional Apps |
L2TP, PPTP, DMVPN, VRRP, QoS, SNMP, Language, RCMS, Dynamic Route, Captive Portal, Modbus Master, TR069, Edge2Cloud, etc. |
Software Development Kit (SDK)
|
Supported Programming Languages |
C, C++ |
|
Flash available for SDK |
5 MB |
|
RAM available for SDK |
256 MB |
Regulatory and Type Approvals
|
Environmental |
RoHS 2.0 |
|
EMI |
EN 55032 Conducted Emission Class B |
|
EMS |
EN 61000-4-2 (ESD) Contact Level 2, Air Level 3 EN 61000-4-3 (RS) Level 2 EN 61000-4-4 (EFT) Level 2 EN 61000-4-5 (Surge) Level 3 EN 61000-4-6 (CS) Level 2 EN 61000-4-8 (PFM) Level 2 EN 61000-4-11 (Dips) Class 2 |
Available Models
|
Model |
Supported Frequency Bands |
Certifications |
Order Code |
Package Contents |
|
R2110e-4L |
4G/LTE FDD: B1/2/3/4/5/7/8/12/ 13/18/19/20/25/26/28 4G/LTE TDD: B38/39/40/41 3G: B1/2/4/5/6/8/19 |
CE, UKCA |
A004400714 |
1 x R2110e Router (B Code: B004400757) |
|
R2110e-4L |
4G/LTE FDD: B1/2/3/4/5/7/8/12/ 13/18/19/20/25/26/28 4G/LTE TDD: B38/39/40/41 3G: B1/2/4/5/6/8/19 |
CE, UKCA |
A004400715 |
1 x R2110e Router (B Code: B004400757) 1 x DIN Rail Mounting Kit 2 x Cellular Antenna 2 x Wi-Fi Antenna |
NOTE:
1. For more information about regional & carrier specific variants please contact us
R2110e Downloads
Please note that all product downloads are now located on the Robustel Knowledge Base (https://support.robustel.com) the buttons below will take you to the relevant sections for each product.
Product Documentation
Firmware, Software & Applications
Find More From Robustel
