Robustel R2110e
eSIM Router

Industrial Dual-SIM 4G/LTE Router with 1x eSIM/eUICC, 1x 2FF SIM 4 x Gigabit LAN Ports

The Robustel R2110e is an LTE Cat-4 industrial router built for deployments where managing SIM logistics across geographies, carriers, or long device lifecycles creates operational friction. It shares the same proven hardware platform as the R2110, with one deliberate change: the second physical SIM slot is replaced by an embedded MFF2 eSIM compliant with GSMA SGP.22, producing a hybrid 1×Mini SIM (2FF) + 1×eSIM architecture that supports remote profile download, activation, switching, and removal — without physical access to the device.

The practical implication is a different operational model. Where the R2110 suits stable deployments with locally-sourced SIM requirements, the R2110e is the right choice when connectivity management needs to live in software: because devices are geographically dispersed across carrier boundaries, because the device lifecycle will outlast the current carrier agreement, or because deployment scale makes per-device SIM handling impractical.

All core R2110 capabilities are carried over: WWAN/WAN/WLAN link redundancy with ICMP detection, cold and warm backup with load balancing, IPsec/OpenVPN/GRE/WireGuard VPN, four gigabit Ethernet ports (configurable as 1×WAN + 3×LAN), RS-232/RS-485 serial, isolated DI/DO, dual-band 802.11ac Wi-Fi, optional GNSS, and the full RobustOS platform with C/C++ SDK and App Centre.

eSIM/eUICC-Unterstützung

Remotely provision and deploy up to 8 eSIM/eUICC Profiles

WLAN

Dualband-802.11ac-WLAN 5 auf 2,4-GHz- und 5-GHz-ISM-Bändern

SCHNITTSTELLEN

1x WAN, 3x LAN oder 4x LAN,
1x RS-232, 1x RS-485, 1x DI/DO

BETRIEBSSYSTEM

RobustOS – Leichtgewichtiger Linux-Kernel mit vollständigem SDK

RCMS AN BORD

RCMS Cloud-Geräteverwaltung aktiviert

R2110 Produktvideo

Beispiel R2110 Anwendungsfälle

Konnektivitäts-Hub im Fahrzeug

Provides secure LTE backhaul and onboard Wi-Fi for fleet operations. The hybrid SIM + eSIM architecture means carrier profiles can be switched remotely as vehicles cross regional boundaries or when contract terms change — without retrieving the device or touching the SIM tray. Optional GNSS supports location reporting; RCMS centralises firmware updates, configuration, and eSIM profile management across the entire fleet from a single platform.

Intelligente Verkehrssysteme

Backhaul controller and signage data to your platform via encrypted tunnels; dual-link failover across WWAN and WAN maintains reachability. For multi-authority or cross-border deployments where infrastructure is managed under different carrier agreements, eSIM profile switching allows connectivity to be reassigned remotely as operational boundaries or contracts change — without dispatching technicians to roadside cabinets.

Digitale Beschilderung und Bildschirme

Delivers reliable LTE backhaul from media players to your CMS, keeping content updates and monitoring data flowing. For large screen networks spanning multiple cities or regions, the R2110e’s remote eSIM provisioning removes the need to pre-configure SIMs per location or send field teams to swap carriers when a site moves to a different network contract. Centralised management via RCMS covers configuration, firmware, and connectivity from a single console.

Suchen Sie nach weiteren Anwendungsfällen?


Mit Millionen von Robustel-Geräten, die in mehr als 100 Ländern im Einsatz sind, ist es unmöglich, alle oben genannten Anwendungsfälle zu erfassen. Entdecken Sie über die folgenden Links einige der spannenden und innovativen Möglichkeiten, wie unsere Technologie weltweit Wirkung zeigt.

Dieses Gerät ist RCMS-fähig.


RCMS ist eine cloudbasierte IoT-Geräteverwaltungsplattform, die Ihnen Echtzeit-Transparenz über Ihre gesamte Robustel-Flotte bietet. So können Sie jederzeit und von überall aus Fehler beheben, Updates durchführen und die Leistung optimieren, ohne Techniker vor Ort entsenden zu müssen.

Produktbefestigungsoptionen

Tischhalterung

DIN-Schienenmontage

Wandhalterung

Systemarchitektur

Betriebssystem

Robustes Betriebssystem

CPU

Dual-Core-MIPS, 880 MHz

RAM

512 MB

Blitz

32 MB

Mobilfunk

Unterstützte Technologien

4G/LTE, 3G, 2G

Antennen

2 (HAUPT + DIV)

Steckverbinder

SMA-K

SIM

1 x Mini-SIM (2FF)

eSIM

1x eSIM/eUICC (MFF2); GSMA SGP.22 compliant; supports profile download/removal and typically up to 8 eSIM profiles

Ethernet

Ethernet-Anschlüsse

4 x 10/100/1000 Mbit/s, standardmäßig 4 x LAN, konfigurierbar als 1 x WAN + 3 x LAN

Magnetisolationsschutz

1 kV

PoE-Eingang (optional)

PoE-Ports

WAN1

PoE-Standards

802.3at PD

Serielle Schnittstelle

Serielle Schnittstellen

1 x RS-232 + 1 x RS-485

Steckverbinder

2 x 3-polig auf 2 x 5-polige 3,5-mm-Buchse

Baudrate

300–115200 bps

Signaldefinition

RS-232: TXD, RXD, GND
RS-485: A, B

Digitaler Ein-/Ausgang

DI/DO-Ports

1 x DI + 1 x DO (Nasskontakt)

Steckverbinder

2 x 2-polig auf 2 x 5-polige 3,5-mm-Buchse

Isolation

3.75 kVDC

Absolute maximale Gleichspannung

+30 VDC (DI), +30 VDC (DO)

Absolutes ADC-Maximum

100 mA (DO)

Signaldefinition

DI+, DI-, DO+, DO-

WLAN

WLAN-Antennen

2 (WLAN 1 + WLAN 2)

Steckverbinder

RP-SMA-K

Normen

802.11 a/b/g/n/ac; 2 x 2 MIMO; supports AP and client modes

Frequenzbänder

2.412–2.472 GHz (2.4 GHz ISM band)
5.15–5.825 GHz (5 GHz ISM band)

Sicherheit

WEP, WPA, WPA2, WPA3

Verschlüsselung

AES, TKIP, WEP64

GNSS/GPS (optional)

GNSS-Antennen

1

Steckverbinder

SMA-K mit 50 Ohm Impedanz

GNSS-Technologie

GPS/QZSS/GLONASS/Galileo/BeiDou

Tracking-Empfindlichkeit

GNSS: größer als -148 dBm

Horizontale Positionsgenauigkeit

GNSS: 2,5 m

Andere Schnittstellen

Reset-Taste

1 x RST

LED-Anzeigen

1 x RUN, 1 x MODEM, 1 x NET, 1 x USR, 1 x RSSI, and 1 x Wi-Fi

Aufsichtsbehörde

Eingebaut

SD-Karte

1 x Micro SD

USB

1 x USB 2.0 (Host), 5 V, 500 mA

Stromversorgung und Verbrauch

PSU-Anschluss

3-polige 3,5-mm-Buchse mit Verriegelung

Eingangsspannung

12/24 V DC, 9–36 VDC
42.5–57.0 V (PoE-PD)
Reverse polarity protection, surge protection

Stromverbrauch

Leerlauf: 6 W bei 12 V
Maximal: 16 W bei 12 V

Empfohlene Stromversorgung

12 V DC/1,5 A Netzteil

Physikalische Eigenschaften

Eindringungsschutz

IP30

Gehäuse & Gewicht

Metall, 500 g

Abmessungen

48 x 100 x 125 mm

Installationsoptionen

Tischgerät, Wandhalterung und 35-mm-DIN-Schiene

Betriebstemperatur

-20 to +55 °C (normal operation)
-25 ti +70 °C (extended operation)

Lagertemperatur

-40 to +85 °C

Relative Luftfeuchtigkeit

5–95% RH (non-condensing)

Software-Funktionen

Netzwerkprotokolle

PPP, PPPoE, ARP, VLAN, ICMP, NAT, TCP, UDP, DHCP, DNS, DDNS, NTP, HTTP, HTTPS, Telnet, SSH2, SMTP, etc.

VPN-Tunnel

IPsec, OpenVPN, GRE, WireGuard

Firewalls

DMZ, Anti-DDoS, Filterung (IP/Domänenname/MAC-Adresse), Port-Mapping, Zugriffskontrolle

Fernverwaltung

RCMS, Web, CLI, SMS

Serielle Schnittstellenprotokolle

Transparent, TCP-Client/Server, UDP, Modbus RTU zu TCP

SIM-Verwaltung

Smart Roaming V3, eSIM Management, etc.

Optionale Apps

L2TP, PPTP, DMVPN, VRRP, QoS, SNMP, Language, RCMS, Dynamic Routing, Captive Portal, Modbus Master, TR069*, Edge2Cloud, etc.

Softwareentwicklungs-Kit (SDK)

Unterstützte Programmiersprachen

C, C++

Flash für SDK verfügbar

5 MB

Für SDK verfügbarer RAM

256 MB

Regulatorische und Typgenehmigungen

Umwelt

RoHS 2.0, WEEE

EMI

EN 55032 Conducted Emission Class A
EN 55032 Radiated Emission Class B

EMS

EN 61000-4-2 (ESD) Contact Level 2, Air Level 3
EN 61000-4-3 (RS) Level 2
EN 61000-4-4 (EFT) Level 2
EN 61000-4-5 (Surge) Level 3 AC Mains Power Port; Level 3 Signal Ports
EN 61000-4-6 (CS) Level 2
EN 61000-4-8 (PFM) Level 2
EN 61000-4-11 (Dips) Class 2

Verfügbare Modelle

Modell

Unterstützte Frequenzbänder

Zertifizierungen

Bestellcode

Inhalt der Verpackung

R2110e-4L
Global

4G/LTE FDD: B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28
4G/LTE TDD: B38/39/40/41
3G: B1/2/4/5/6/8/19
2G: B2/3/5/8

CE, UKCA

A004400714

1 x R2110e Router
(B Code: B004400757)
1 x DIN Rail Mounting Kit

R2110e-4L
Global

4G/LTE FDD: B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28
4G/LTE TDD: B38/39/40/41
3G: B1/2/4/5/6/8/19
2G: B2/3/5/8

CE, UKCA

A004400715

1 x R2110e Router
(B Code: B004400757)
2 x Cellular Antenna
2 x Wi-Fi Antenna
1 x Power Adapter
1 x DIN Rail Mounting Kit

HINWEIS:
1. Für weitere Informationen zu regionalen und netzspezifischen Varianten kontaktieren Sie uns bitte.

R2110e Downloads

Bitte beachten Sie, dass alle Produkt-Downloads nun in der Robustel-Wissensdatenbank (https://support.robustel.com) zu finden sind. Über die Schaltflächen unten gelangen Sie zu den entsprechenden Abschnitten für jedes Produkt.

Produktdokumentation


Firmware, Software und Anwendungen

Mehr von Robustel finden