Robustel R2110
5G RedCap

Industrial Dual-SIM 5G RedCap Router with 4 x Gigabit LAN, GNSS & Dual-Band Wi-Fi

The Robustel R2110 5G RedCap is engineered for deployments where connectivity demands come from multiple directions at once — distributed fleets, smart city infrastructure, in-vehicle networks, and multi-site digital operations where a single link failure cannot be an acceptable outcome. At its centre is native 5G RedCap (3GPP Release 17) cellular, providing the throughput headroom and 5G core network access that these application classes increasingly require. Surrounding it is a multi-link architecture WWAN, WAN, and WLAN link backup with configurable cold and warm failover modes and load balancing that keeps traffic flowing across whichever combination of cellular, Ethernet, and Wi-Fi links are available at any given moment.

What distinguishes the R2110 5G RedCap from simpler cellular routers is the breadth of its integrated capability. Integrated GNSS spanning GPS, GLONASS, Galileo, BeiDou, and QZSS enables position reporting and asset tracking alongside connectivity relevant for fleet vehicles, mobile infrastructure, and any deployment where location is operationally significant. Four Gigabit Ethernet ports, dual-band 802.11ac Wi-Fi 5, RS-232, RS-485, and a DI/DO port give integrators the interface coverage to handle mixed environments without additional hardware.

5G REDCAP CELLULAR

5G NR-Light (3GPP Release 17) with 4G/LTE fallback, Dual-SIM and Smart Roaming

WWAN, WAN & WLAN link backup with cold/warm failover modes and load balancing

INTEGRATED GNSS

GPS, GLONASS, Galileo, BeiDou & QZSS position reporting built in as standard

INTERFACES

4x GbE, 802.11ac Wi-Fi 5, RS-232, RS-485, 1x DI/DO, USB 2.0, Micro SD

RCMS ON-BOARD

Cloud device management with OTA updates and centralised fleet visibility

Example R2110 Use Cases

Fleet & In-Vehicle Connectivity

For workforce fleets service vehicles, utility trucks, field engineering teams the R2110 5G RedCap consolidates what would otherwise be multiple onboard devices into a single managed platform. The 5G RedCap uplink handles concurrent data streams with headroom to spare: real-time telematics feeding back to fleet management platforms, onboard CCTV recording and uplink, in-vehicle payment terminals requiring reliable, low-latency connectivity, and remote diagnostics tools accessing vehicle systems or field equipment simultaneously.

Temporary Site Connectivity

Construction sites, mining operations, infrastructure projects, and pop-up facilities share a common problem: they need site-grade connectivity in locations where fixed-line infrastructure either doesn’t exist or can’t be provisioned quickly enough. The R2110 5G RedCap functions as a primary site router in these environments — 5G RedCap cellular as the WAN uplink, four Gigabit LAN ports for local device switching, and dual-band Wi-Fi for wireless coverage across the site footprint.

IP Camera Backhaul

Where cameras and NVRs are independently powered or already connected through a separate PoE switch, the connectivity challenge shifts from powering devices to moving their data reliably. The R2110 5G RedCap is designed for exactly this role: a high-throughput 5G RedCap cellular uplink delivers the bandwidth that multi-camera video streams require, while four Gigabit LAN ports provide local switching capacity for NVRs and associated security infrastructure at the same site. RCMS enables remote monitoring, reboot, and configuration of the router itself without dispatching an engineer to the camera location.

Looking for more use cases?


With millions of Robustel devices deployed across more than 100 countries, it’s impossible to capture every use case above. Explore the links below to discover some of the exciting and innovative ways our technology is making an impact worldwide.

This Device is RCMS Ready


RCMS is a cloud-based IoT device management platform that gives you real-time visibility across your entire Robustel fleet. So you can troubleshoot, update, and optimize performance from anywhere at anytime, without sending engineers to site.

Product Mounting Options

Desktop Mount

DIN Rail Mount

Wall Mount

System Architecture

Operating System

RobustOS

CPU

Dual-core MIPS, 880 MHz

RAM

512MB

Flash

32MB

Cellular

Supported Technologies

5G RedCap, 4G/LTE

Antennas

2 (MAIN + DIV)

Connector

SMA-K

SIM

2 x Mini SIM (2FF)

Ethernet

Ethernet Ports

4 x 10/100/1000 Mbps, 4 x LAN by default, can be configured as 1 x WAN + 3 x LAN

Magnet Isolation Protection

1 KV

PoE In (Optional)

PoE Ports

WAN1

PoE Standards

802.3at PD

Serial Port

Serial Ports

1 x RS-232 + 1 x RS-485

Connector

2 x 3-pin on 2 x 5-pin 3.5 mm female socket

Baud Rate

300 bps – 115200 bps

Signal Definition

RS-232: TXD, RXD, GND
RS-485: A, B

Digital Input/Output

DI/DO Ports

1 x DI + 1 x DO (wet contact)

Connector

2 x 2-pin on 2 x 5-pin 3.5 mm female socket

Isolation

3.75 KV DC

Absolute Maximum VDC

+30 V DC (DI), +30 V DC (DO)

Absolute Maximum ADC

100 mA (DO)

Signal Definition

DI+, DI-, DO+, DO-

Wi-Fi

Wi-Fi Antennas

2 (Wi-Fi 1 + Wi-Fi 2)

Connector

RP-SMA-K

Standards

802.11 a/b/g/n/ac, 2 x 2 MIMO, supporting AP and Client modes

Frequency Bands

2.412 – 2.472 GHz (2.4 GHz ISM band)
5.18 – 5.825 GHz (5 GHz ISM band)

Security

WEP, WPA, WPA2, WPA3

Encryption

AES, TKIP, WEP64

GNSS/GPS (Optional)

GNSS Antennas

1

Connector

SMA-K with 50 ohms impedance

GNSS Technology

GPS/QZSS/GLONASS/Galileo/BeiDou

Tracking sensitivity

GNSS: greater than -148 dBm

Horizontal position accuracy

GNSS: 2.5 m

Other Interfaces

Reset Button

1 x RST

LED Indicators

1 x RUN, 1 x MODEM, 1 x NET, 1 x USR, 1 x RSSI, 1 x Wi-Fi

Watchdog

Built-in

SD Card

1 x Micro SD

USB

1 x USB 2.0 (host), 5 V, 500 mA

Power Supply & Consumption

PSU Connector

3-pin 3.5 mm female socket with lock

Input Voltage

12/24 V DC, 9 ~ 36 VDC
42.5 ~ 57.0 V (PoE-PD)
Reverse polarity protection, surge protection

Power Consumption

Idle: 6 W@12 V
Max: 16 W@12 V

Recommended Power Supply

12 V DC/1.5 A power adapter

Physical Characteristics

Ingress Protection

IP30

Housing & Weight

Metal, 500g

Dimensions

48 x 100 x 125 mm

Installation Options

Desktop, Wall Mount and 35mm DIN Rail

Operating Temperature

-20 – +55 °C (normal operation)
-25 – +70 °C (extended operation)

Storage Temperature

-40 – +85 °C

Relative Humidity

5 – 95% RH (non-condensing)

Software Features

Network Protocols

PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, NTP, SMTP, Telnet, ARP, VLAN, SSH2, DDNS, etc.

VPN Tunnels

IPsec, OpenVPN, GRE, WireGuard

Firewalls

DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control

Remote Management

RCMS, Web, CLI, SMS

Serial Port Protocols

Transparent, TCP Client/Server, UDP, Modbus RTU to TCP

SIM Management

Smart Roaming V3

Optional Apps

L2TP, PPTP, DMVPN, VRRP, QoS, SNMP, Language, RCMS, Dynamic Route, Captive Portal, Modbus Master, TR069, Edge2Cloud, etc.

Software Development Kit (SDK)

Supported Programming Languages

C, C++

Flash available for SDK

5 MB

RAM available for SDK

256 MB

Regulatory and Type Approvals

Environmental

RoHS 2.0

EMI

EN 55032 Conducted Emission Class B
EN 55032 Radiated Emission Class B

EMS

EN 61000-4-2 (ESD) Contact Level 2, Air Level 3

EN 61000-4-3 (RS) Level 2

EN 61000-4-4 (EFT) Level 2

EN 61000-4-5 (Surge) Level 3

EN 61000-4-6 (CS) Level 2

EN 61000-4-8 (PFM) Level 2

EN 61000-4-11 (Dips) Class 2

Available Models

Model

Supported Frequency Bands

Certifications

Order Code

Package Contents

R2110-5R
EMEA

5G NR: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
4G/LTE FDD: B1/B3/B5/B7/B8/B20/B28
4G/LTE TDD: B38/B40/B41/B42/B43

CE*, UKCA*

A004400712

1x Gateway (B Code: B004400756)
1x DIN Rail Mounting Kit
2x Cellular Antenna
2x Wi-Fi Antenna
1x GNSS Antenna1x Power Adapter

R2110-5R
EMEA

5G NR: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
4G/LTE FDD: B1/B3/B5/B7/B8/B20/B28
4G/LTE TDD: B38/B40/B41/B42/B43

CE*, UKCA*

A004400713

1x Gateway (B Code: B004400756)
1x DIN Rail Mounting Kit

NOTE:
1. For more information about regional & carrier specific variants please contact us
2. * Denotes certification underway

R2110 5G RedCap Downloads

Please note that all product downloads are now located on the Robustel Knowledge Base (https://support.robustel.com) the buttons below will take you to the relevant sections for each product.

Product Documentation


Firmware, Software & Applications

Find More From Robustel