L’R5020 di Robustel offre connettività cellulare di nuova generazione a un prezzo altamente competitivo.
Offrendo una copertura globale della banda 3G, 4G/LTE e 5G in un fattore di forma industriale compatto, l’R5020 consente la rapida implementazione di applicazioni IoT ad alta velocità in settori verticali diversi come trasporti , connettività aziendale e segnaletica digitale .
The R5020 is Robustel’s first 5G-capable router supporting global 5G, 4G and 3G bands in a compact industrial form factor. It enables rapid deployment of high-speed IoT applications in verticals as diverse as Transportation, Enterprise Connectivity and Digital Signage.
The R5020 leverages the tried-and-tested high performance CPU platform and RobustOS – a mature and stable Operating System developed in-house by Robustel. R5020 is compatible with 3GPP Release 15 and is designed for use by the following applications:
In-vehicle applications: Whether it is passenger WiFi, CCTV debrief, ticketing or a similar “onboard” requirement, the R5020 offers a simple and effective solution to increase internet speeds and future-proof current installations. The R5020 has achieved E-Mark certification for in-vehicle use, and supports GNSS positioning. A version with vehicle ignition sensing is available to protect vehicle batteries when the engine is off.
Broadband Failover: The R5020 can be configured to use Ethernet or Wifi as primary internet and failover to 4G/5G in the event of an outage. This can help to provide resilience to outlets such as shops and small offices at a reasonable cost, and provide sufficient bandwidth for multiple users. IPsec, DMVPN and Open VPN protocols can be used for connections into core networks.
Primary Broadband: Cellular networks can now provide unlimited 5G tariffs at very reasonable prices, offering hundreds of Mbps internet over the air. For many, a chance to cut the cables and use a wireless internet connection can be technically or commercially favourable.
Key Features:
Cellular Interface |
|
Number of antennas |
4 (ANT0 + ANT1 + ANT2 + ANT3) |
Connector |
SMA-K |
SIM |
2 Mini SIM (2FF) |
|
|
GNSS (Optional, requires a 4-in-1 Combo Antenna to support this function) |
|
Number of antennas |
2 (ANT1 + ANT2, Multiplexing cellular antenna interface) |
Connector |
SMA-K |
GNSS technology |
GPS/GLONASS/BeiDou (Compass)/Galileo |
Horizontal position accuracy |
< 2m |
|
|
Ethernet Interface |
|
Number of ports |
4 x 10/100/1000 Mbps, 4 LAN by default, can be configured as 1 WAN + 3 LAN Support 802.3at PD feature on ETH0 (optional) |
Magnet isolation protection |
1 KV |
|
|
WiFi Interface |
|
Number of antennas |
2 (WiFi1 + WiFi2) |
Connector |
RP-SMA-K |
Standards |
802.11b/g/n/ac 2*2 MIMO, supports AP and Client modes |
Frequency bands |
2.412 – 2.472 GHz (2.4 GHz ISM band) 5.15 – 5.825 GHz (5 GHz ISM band) |
Security |
WPA, WPA2, WEP |
Encryption |
AES, TKIP, WEP64 |
Data speed |
5G: Up to 867Mbps 2.4G: Up to 300Mbps |
|
|
Serial Interface |
|
Number of ports |
1 x RS232 + 1 x RS485 |
Connector |
2 x 5-pin 3.5 mm female socket |
ESD protection |
±8 KV |
Baud rate |
300bps to 115200bps |
Signal definition |
RS-232: TXD, RXD, GND RS-485: Data+ (A), Data- (B), Ground (GND) |
|
|
DI/DO |
|
Type |
1x DI + 1 x DO, wet contact |
Connector |
2 x 5-pin 3.5 mm female socket |
Isolation |
3.75KV DC (opto-isolator) |
Absolute maximum VDC |
“V+” +30V DC (DI), +30V DC (DO) |
Absolute maximum ADC |
100 mA |
Signal definition |
IN, OUT, IGND, OGND |
Others |
|
Reset button |
1 x RST |
Expansion |
1 x USB2.0 Host; 5V/500mA |
LED indicators |
1 x RUN, 1 x Modem, 1 x USR, 1 x RSSI, 1 x NET, 1 x WIFI |
Built-in |
Watchdog |
|
|
Software (Basic features of RobustOS) |
|
Network protocols
|
PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, NTP, SMTP, Telnet, SSH2, DDNS, etc. |
VPN tunnel |
IPsec, OpenVPN, GRE |
Firewall |
DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
Management |
Web, CLI, SMS |
Serial port |
Transparent, TCP Client/Server, UDP, Modbus RTU to TCP |
Others |
Smart Reboot, Data Guard, Smart Roaming, etc. |
|
|
SDK |
|
Supported programming languages |
C, C++ |
Flash available for SDK |
5MB |
RAM available for SDK |
256MB |
|
|
App Center (Available Apps for RobustOS) |
|
Apps* |
L2TP, PPTP, DMVPN, VRRP, QoS, SNMP, Language, RCMS, Dynamic Route, Captive Portal, Modbus Master |
*Request on demand. For more Apps please visit www.robustel.com. |
|
|
|
Power Supply and Consumption |
|
Connector |
3-pin 3.5 mm female socket with lock |
Input voltage |
9 to 36V DC (POE-PD) 10 to 30V DC (ACC) |
Power consumption |
Idle: 500 mA@12 V Data link: 1.2 A (peak) @12 V |
|
|
Physical Characteristics |
|
Ingress protection |
IP30 |
Housing & Weight |
Aluminum, 500 g |
Dimension |
125 x 100 x 48 mm |
Installations |
Desktop, wall mounting and DIN rail mounting |
Operating Temperature |
-25 to +70 °C |
Storage Temperature |
-40 to +85 °C |
Relative Humidity |
5 to 95% RH |
|
|
Approvals |
|
Environmental |
RoHS2.0, WEEE* |
*in progress |
|
Model |
PN |
GNSS |
ACC |
POE-PD |
Frequency Bands* |
Country/ Region |
Certification (*In progress) |
R5020-5G-A09GL-A |
B064803 |
GPS/ GLONASS/ BeiDou (Compass)/Galileo |
🗸 |
– |
5G: NR NSA: n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/ n40/n41/n48*/n66/n71/n77/n78/n79 NR SA: n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/ n40/n41/n48*/n66/n71/n77/n78/n79 4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12(B17)/B13/B14/B18/ B19/B20/B25/B26/B28/B29/B30/B32/B66/B71 LTE TDD: B34/B38/B39/B40/B41/B42/B43/B48 3G: WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 |
Global |
E-Mark, CE, RCM |
R5020-5G-A09GL-B |
B064802 |
– |
🗸 |
Global |
E-Mark, CE, RCM |
||
R5020-5G-A18CN-A |
B064805 |
– |
🗸 |
– |
5G: NR NSA: n41/n78/n79; NR SA: n1/n28*/n41/n77/n78/n79 4G: LTE FDD: B1/B2/B3/B5/B7/B8/B20/B28 LTE TDD: B34/B38/B39/B40/B41 3G: WCDMA: B1/B2/B5/B8 |
China |
CCC* |
R5020-5G-A18CN-B |
B064804 |
– |
– |
🗸 |
China |
CCC* |
* For more information about frequency bands in different countries, please contact your Robustel sales representative.